in

Solving the Problem of Your Napa Floor Jack Not Lifting

Napa Floor Jack Won’t Lift – Troubleshooting Tips

A Napa floor jack is a great tool for a variety of purposes. It can be used to lift and lower vehicles, or to raise heavy objects such as engines. However, if your Napa floor jack won’t lift, it can be frustrating and inconvenient. Here are some troubleshooting tips to help you get your Napa floor jack up and running again.

Check the Hydraulic Fluid Level

The first thing you should do if your Napa floor jack won’t lift is to check the hydraulic fluid level. If the fluid level is low, the jack will not be able to generate enough pressure to lift the load. To check the fluid level, locate the fill plug on the jack and remove it. The fluid level should be up to the level of the fill plug.

If the fluid level is low, you can add hydraulic fluid to the jack. Make sure you use the correct type of fluid for your jack, as specified in the owner’s manual. Once you have added the fluid, replace the fill plug and try to lift the load again.

Check the Pump

If the fluid level is correct and the jack still won’t lift, then you may have a problem with the pump. The pump is responsible for generating the pressure that lifts the load. To check the pump, locate the pressure relief valve on the jack and press it. If you hear a hissing sound, then the pump is working properly.

If there is no hissing sound, then the pump may be damaged and will need to be replaced. You can find replacement pumps at most automotive stores or online.

Check the Cylinder

The cylinder is the part of the jack that actually lifts the load. If the cylinder is damaged, then the jack won’t be able to lift the load. To check the cylinder, locate the check valve on the jack and press it. If you hear a clicking sound, then the cylinder is working properly.

If there is no clicking sound, then the cylinder may be damaged and will need to be replaced. You can find replacement cylinders at most automotive stores or online.

Other Troubleshooting Tips

If you have checked the fluid level, pump, and cylinder and the jack still won’t lift, then you may need to take it to a professional for further troubleshooting. Here are some other things to keep in mind when troubleshooting a Napa floor jack:

  • Make sure the load you are trying to lift is not too heavy for the jack.
  • Check for any debris or dirt that may be blocking the jack.
  • Check the jack’s valves and seals for any signs of wear or damage.
  • Check the jack’s safety valve to make sure it is functioning properly.

Conclusion

If your Napa floor jack won’t lift, then you should check the fluid level, pump, and cylinder. If these components are working properly, then you may need to take it to a professional for further troubleshooting. With these tips, you should be able to get your Napa floor jack up and running again in no time.

Written by Best Floor Jack

Leave a Reply

Your email address will not be published. Required fields are marked *

GIPHY App Key not set. Please check settings

Find Genuine Napa Floor Jack Replacement Parts – Quick & Easy!

Find the Perfect Old Orange Floor Jack for Your Needs