Best High Lift Floor Jacks for Trucks and SUVs

If you’re driving a Chevy Silverado, Jeep Wrangler, or any other large truck or SUV, your basic floor jack isn’t going to cut it. You need something that can accommodate the extra high clearance of those vehicles, and your jack needs to be strong enough to lift a heavy truck or SUV.

That doesn’t mean that you necessarily have to have a massive 3-ton hydraulic jack to do the job. There are plenty of bottle jack options, and some other options that are more portable. Your jack just needs to be able to lift your vehicle higher, and it needs to be strong enough to handle the weight.

In this guide, we aim to highlight the best rated high lift jacks on the market, tell you the pros and cons of each, and answer any of your questions about the general use of a high lift jack.

High Lift Floor Jack Reviews

The following reviews highlight the strengths and weaknesses of the best high lift jacks on the market. These are your best options for lifting your truck or SUV, and the list has plenty of variety. So, you should be able to find the perfect jack for your vehicle.

You can also order your favorite jack on this list without ever leaving your house. We’ve put extra care into making sure all of these jacks are available online for your convenience.

Hi-Lift HL484

If you enjoy off-road adventures, this is the best jack that you can buy. The farm jack design is made from cast steel and stamped steel, and it was made with durability in mind.

This 48 inch jack has a two piece handle, a shear bolt to prevent going over the maximum weight capacity, and it can safely lift up to 7000 pounds.

What makes this high lift jack so amazing for off-road adventures is that it is adept at working in unfavorable conditions. It’s tall and slender frame is extremely portable, but it packs the strength of a traditional floor jack. Furthermore, it doesn’t have a large base with wheels. This gives the jack some increased stability and maneuverability on uneven terrain. If the ground is muddy, you can easily slip a board under its base, and the increased surface area will allow it to work like a charm.

It’s difficult to find any cons with this jack, but customers have occasionally complained about issues that occurred during shipping. For some reason, the package frequently gets banged up on the way to customers. Damage to the packaging is little more than a slight annoyance. However, it’s important to note that all of the safety notes and specs are on the unit. So, the superficial scratching that can affect the exposed jack can potentially scratch off important information. It shouldn’t be a big deal for those who know how to use a farm style jack, but it’s still worth noting.

Overall, this high lift jack is the perfect option for off-road use. It’s lightweight, easily portable, stable on rocky ground, and it packs quite the punch in terms of strength. You might want another option for garage use, but this is a great option to throw in your vehicle.

Arcan XL2T Floor Jack

This isn’t actually a high lift jack. At least, it’s not made to be one. However, the Arcan XL2T is an extremely capable floor jack, and it can definitely handle a truck or SUV that is on the smaller size. That’s one of the reasons that it’s one of the top rated floor jacks on the market. It’s simply the best all around jack available.

The maximum lift on the XL2T is 24 inches. That’s several inches higher than almost any other basic floor jack, and it’s just enough to safely raise trucks and other large vehicles. It also has a great dual-pump function to help it raise vehicles quickly. Not only that, but its chassis is longer than most basic floor jacks. So, it has a higher stability than most other normal floor jacks.

In terms of cons, the Arcan XL2T is heavy. To accommodate all of its fancy features, it has a lot of heavy parts, and its total weight is 96 pounds. This really isn’t a floor jack that you want to repeatedly lift in and out of your truck. However, it does have some steel casters to make it easier to move around.

Overall, this is a great jack for those who need a jack of all trades. It has a low enough clearance to lift something as small as a Prius, but it can lift loads as heavy as a mid-sized truck with ease. If you really want a floor jack that can lift your wife’s car, and then turn around and jack up your favorite truck, the Arcan XL2T can do it admirably.

Hi-Lift XT485 X-TREME

The XT485 X-TREME is basically an upgraded version of the previous Hi-Lift jack on this list, and its name isn’t a joke. This thing really is an extreme jack. It can easily lift the largest consumer vehicles. If you’re driving around in a full sized pickup truck, this 48 inch jack can lift it as if it were lighter than a feather. Furthermore, it boasts an adjustable clamp that can function as a winch, clamp, or spreader. That lends a degree of versatility to this jack that other jacks can’t match.

You can also count on this Hi-Lift product outlasting the majority of other top rated jacks on the market. It’s made from an extremely durable steel, and it has a rust proof coating made from charcoal, metallic powder, gold, and zinc. If the coating is properly cared for, the XT485 is pretty much rust proof.

However, it isn’t without one major flaw. Like the XT484, the XT485 is prone to shipping issues. Since it relies so heavily on its coating to prevent rust, the scratches that simply damage the XT484’s appearance can cause actual damage to the XT485. If the coating is damaged, it will rust at an incredibly fast rate. It’s best to make sure that your XT485 is kept dry, and you should definitely check for coating issues when it arrives at your door.

OTC 9320 Stinger Bottle Jack

This hydraulic bottle jack gives you the strength of a high lift jack without the large size. In fact, this Stinger bottle jack can lift up to 20 tons. It can’t lift as high as other jacks on this list, but there’s no way any of the other jacks can lift such heavy loads.

The construction of the OTC Stinger is exceptional. The base and the pump cylinder are both made from forged steel. This should prevent any air leaks that would render the bottle jack useless. It also comes with a great warranty encase it ever fails. That’s not very likely, though. This is one of the most solidly built high lift jacks available. If there are any minor issues, you don’t have to send it back. It comes with a free repair kit, and you can handle any small issues on your own. Of course, you’re not forced to.

Overall, this is the perfect replacement jack to throw in the back of your truck or SUV and forget about. It’s small, it’s ridiculously powerful, and it has plenty of clearance for vehicles that aren’t too tall.

The only issue that we can find with this jack is its lack of clearance. You can’t lift vehicles that are too high off of the ground. Considering this is a list for high lift jacks, that makes it one of our least recommended jacks. However, that shouldn’t dissuade you from ordering it if you have a vehicle that doesn’t require a lot of clearance. This is one of the most powerful jacks we can recommend, and it’s extremely durable. Just make sure to check your vehicle out before you commit to buying this one.

ARB 72X10 X-Jack Inflatable Jack

This high lift jack is a unique one. It’s definitely not going to fit the bill for a garage jack, but it can perform better than any other jack in extreme conditions.

The X-Jack is an inflatable jack that can easily lift a large truck or SUV by slowly inflating via your exhaust pipe. This gives it a few advantages in inclement weather. When it has snowed or rained very heavily, the X-Jack’s large surface area keeps it from sinking into the ground like other jacks. It’s also extremely easy to store because it’s essentially a heavy duty balloon. Last, but certainly not least, the X-Jack is powered by your exhaust pipe. You just let your truck run, attach the hose to the end of your exhaust pipe, and then you watch your vehicle lift up due to a fancy balloon. You don’t have to painstakingly work a jack handle to make it work. It’s unique, and it’s one of the most interesting jacks on the market. Not to mention, it can really help you out if you’re not physically capable of using a jack without issues.

Overall, you should really consider the X-Jack if you plan on traveling in areas with a lot of mud or snow. It boasts unparalleled stability in those conditions, and it doesn’t take up a lot of room. Also, you don’t have to worry about providing a power source or exerting any physical strength. Your exhaust pipe does all of the work.

However, there are inherent issues with using a balloon to jack your truck or SUV up. You really have to pay attention to the ground and the contact points on your vehicle. While the X-Jack is made out of durable materials, it is still prone to being punctured. If that happens, you’re stranded without a jack. It might be a good idea to throw a decent bottle jack in your vehicle as a back up. If you’ve read all of these reviews, you know that the OTC Stinger can fill that back up role better than anything else.

Torin Big Red 83006 Trolley Jack

This hydraulic jack is a great option for mid-sized vehicles. It doesn’t have the lift clearance for the tallest of trucks, but it’s more than enough for anything mid-sized and lower.

It comes with a removable extension on the neck of the jack, and the trolley style design comes with fully rotatable casters. So, this jack provides quite a bit of maneuverability and customization.

The main positive feature is its price point. The Torin Big Red is a low-priced jack, but it is made to the same high standards of quality as other Torin products. If your budget is a bit tight, you can buy this Big Red jack without worrying about having an inferior product.

Overall, this is basically the discount option on this list. It works perfectly with mid-sized vehicles, and it’s made to Torin’s exceptional quality standards. You can’t expect a whole lot of extras with this jack, though.

It’s also worth noting that Torin often ships their Big Red models with insufficient hydraulic fluid. You might have to resolve this on your own. However, that’s a small price to pay for such a high quality jack at a low price.

Common Questions Regarding High Lifting Jacks

We’ve taken the time to answer the most commonly asked questions on the web in regards to high lift jacks. They’re a fairly simple type of tool, but there are still a few questions that people frequently ask. You can glance over these questions and answers to save you a little time doing Google searches.

How Do You Use A Hi-Lift Jack?

Floor jacks are easily recognizable, and you’ve probably had experience with them before. Bottle jacks are in nearly every car you’ll ever find. They’re just common. However, you probably haven’t used a Hi-Lift jack unless you own an off-road capable vehicle. They’re a bit odd to use. Furthermore, they’re dangerous if used improperly. So, we’ve put together a nifty guide to teach you how to use Hi-Lift jacks.

  • You need to start by placing the Hi-Lift jack on its base. The base is fairly maneuverable, and it’s built to fit into tight spots. So, you shouldn’t have a problem doing this. Just make sure that you have it firmly planted.
  • Under the chassis of any vehicle that a Hi-Lift jack would be used on, there are T-slots. These slots are placed at regular intervals along the chassis. So, you just need to pick one nearest the area that you need to lift, and carefully slide it in.
  • After you’ve attached the jack to a T-slot, you need to engage the safety pin. This will prevent the gears from slipping and causing serious injury.
  • Actually lifting your vehicle is pretty much identical to the process used for floor jacks. You just pump the handle up and down until you reach the desired height of your lift.
  • When you’re trying to lower your vehicle, you have to be cautious. Don’t try to grab the handle if it slips. This can cause serious injuries, or it can drop your vehicle without notice. Just leave it be, and re-evaluate the situation.

Can You Increase The Lift Height Of A Normal Floor Jack?

It’s possible to increase the height of your jack by a few inches. A lot of brands provide extenders that you can purchase as after market parts. However, this only works when your jack height is off by a few inches. If it’s simply too small, you’ll have to order a larger jack.

It’s also worth noting that a lot of people try to use makeshift extenders out of boards and other junk. We advise against that because it can lead to really dangerous situations. Do yourself a favor; Buy a proper extender.

Leave a Reply