Floor Jack Handle Keeps Turning
If you have a floor jack and the handle keeps turning, it can be a real hassle. Fortunately, there are a few simple fixes that can help you get your floor jack working properly again. In this article, we’ll go over the common causes of a floor jack handle that won’t stay in place, and the steps you can take to resolve the issue.
Common Causes of a Floor Jack Handle Turning
When a floor jack handle keeps turning, it’s usually because of one of two common causes:
- The handle is not properly secured.
- The handle is worn or damaged.
The first cause is usually the easiest to fix. If the handle is not properly secured, it can cause it to turn. This can happen if the handle is not tightened down all the way, or if the handle’s screws are loose. The second cause is a bit more complicated, as it could indicate that the handle is worn or damaged and needs to be replaced.
Fixing a Floor Jack Handle That Keeps Turning
Check the Handle
The first step is to check the handle to make sure it is properly secured. Start by checking the screws that hold the handle in place. Make sure they are tight and not loose. If the screws are loose, tighten them down with a screwdriver.
If the screws are already tight, check to see if the handle is worn or damaged. Look for any cracks, chips, or other signs of wear. If the handle is damaged, it will need to be replaced.
Replace the Handle
If the handle is damaged or worn, it will need to be replaced. You can buy replacement handles from most hardware stores or online. Before buying a new handle, make sure it is the right size and shape for your floor jack. You should also check to make sure it is made from a durable material that can withstand the weight of the jack.
Once you have the new handle, replace it by unscrewing the old one and screwing in the new one. Make sure the handle is securely tightened before using the floor jack.
Lubricate the Handle
If the handle is still turning, it may be due to a lack of lubrication. Lubricate the handle with a lubricant such as WD-40 or silicone spray. This will help keep the handle from turning and make it easier to use.
A floor jack handle that keeps turning can be a real hassle, but with a few simple steps, you can get it working properly again. Start by checking the handle to make sure it is properly secured. If it is worn or damaged, replace it with a new handle. Finally, lubricate the handle with a lubricant to help keep it from turning.