Best Floor Jack
DIY Motorcycle Lift With Floor Jack
Do you want to raise your motorcycle for maintenance and repairs? There are many different lifts and jacks available, but one of the most popular and cost effective solutions is to make a DIY motorcycle lift with a floor jack. This is a simple and easy way to get your bike off the ground and ready for work.
Parts Needed
You will need a few parts to make your DIY motorcycle lift. These include:
- Floor Jack
- 2×4 boards
- Screws and Nuts
- Hinges
- Rubber Pads
Steps to Build
The steps to build your DIY motorcycle lift are fairly simple and straightforward. Here is what you need to do:
Step 1: Assemble the Frame
Start by assembling the frame of the lift. Take the two 2×4 boards and attach them together with screws and nuts. Make sure the boards are firmly secured together and the frame is stable.
Step 2: Attach the Hinges
Next, attach the hinges to the frame. Make sure the hinges are securely attached and that they can move freely. This will allow the lift to raise and lower the motorcycle.
Step 3: Place the Rubber Pads
Now, place the rubber pads on the frame. This will provide a cushion between the frame and the motorcycle. Make sure the rubber pads are firmly secured to the frame.
Step 4: Attach the Floor Jack
Finally, attach the floor jack to the frame. Make sure the jack is securely attached and that it can move freely. This will allow you to raise and lower the motorcycle.
Conclusion
Making a DIY motorcycle lift with a floor jack is a great way to raise your bike for maintenance and repairs. All you need is a few parts and some basic tools. Follow the steps above and you will have a working lift in no time.
GIPHY App Key not set. Please check settings