In order to keep your floor jack in working order, you may need to replace the saddle from time to time. The saddle is the part of the jack that actually contacts the vehicle. It is usually made of rubber or plastic, and it can wear out over time due to use and exposure to the elements. Replacing the saddle is a relatively easy task that can be done in a few simple steps.
Step 1: Prepare Your Jack
The first step in replacing your floor jack saddle is to prepare the jack. Make sure the jack is on a flat, stable surface and that it is in the down position. Be sure to wear protective gloves when handling the jack.
Step 2: Remove the Old Saddle
Once the jack is prepared, you can begin to remove the old saddle. Start by removing the bolts that hold the saddle in place. You may need to use a wrench or pliers to loosen the bolts. Once the bolts are removed, you can carefully lift the saddle off of the jack.
Step 3: Install the New Saddle
Now you can install the new saddle. Place the new saddle on the jack and make sure it is aligned properly. Then, use the bolts that you removed from the old saddle to secure the new saddle in place. Be sure to tighten the bolts securely.
Step 4: Test the Jack
Once the new saddle is in place, you should test the jack to make sure it is working properly. Place the jack in the down position and then slowly raise it to make sure it is lifting evenly. If everything seems to be working correctly, your floor jack is now ready for use.
- Be sure to use the correct size bolts when installing the new saddle.
- Check the jack periodically for signs of wear or damage.
- If the jack is not lifting evenly, check the saddle for signs of damage.
Replacing the saddle on your floor jack is a simple task that can help keep your jack in good working order. Be sure to follow the steps outlined above and take the necessary safety precautions when handling the jack. With a little bit of effort, you can keep your floor jack in top shape for years to come.